✉ bestplywood@yushuowood.com  ·  ☎ +86 178 5395 2880

Melamine Faced Board — 80+ Decors

Wear-resistant melamine paper on MDF, particle board or plywood, with matching edge banding supplied to the same batch.

Melamine faced boards in woodgrain and solid colour finishes stacked in the warehouse
Thickness9 – 25 mm
Decors80+ colours
SubstrateMDF / PB / plywood
Size1220×2440 mm

What is Melamine Faced Board?

Melamine faced board is a decorative panel: melamine-impregnated paper is pressed onto an MDF, particle board or plywood substrate under heat, curing into a hard, wear-resistant surface that needs no painting or finishing. It is the material behind most kitchen cabinets, wardrobes and office furniture sold today.

We hold more than 80 decors covering solid colours, woodgrains and stone effects, on substrates from 9 to 25 mm. The detail that matters commercially is edge banding: we supply PVC edging from the same production batch as the board, so the edge colour matches the face instead of sitting a shade off.

Specifications

Standard production range. Sizes, glue types and grades outside this table can be produced to order — tell us the specification your customer requires.

Melamine Faced Board technical specifications
Panel size1220 × 2440 mm · 1830 × 2440 mm
Thickness9 / 12 / 15 / 16 / 18 / 25 mm
SubstrateMDF · Particle board · Plywood · Blockboard
Paper weight80 g/m² solid · 80–120 g/m² woodgrain
Decors80+ colours, woodgrains and stone effects
SurfaceMatte, textured, high-gloss on request
Edge bandingMatching PVC 0.5 / 1 / 2 mm, same batch
FormaldehydeE1 substrate as standard

Why buyers choose our Melamine Faced Board

Edge banding from the same batch

Colour mismatch between board and edging is the most common complaint on finished cabinets. Supplying both from one batch removes the problem at source.

Decors you can reorder

Popular decors are held in continuous production, so a kitchen specified this year can be extended next year without a visible difference.

Substrate choice changes the price, not the look

The same decor can sit on MDF, particle board, plywood or blockboard. We will quote all four so you can position the product at the right price point for your market.

Wear and moisture resistance stated honestly

Standard melamine is fine for vertical surfaces and domestic horizontal work. For commercial kitchens and wet areas, specify a higher wear class and seal the edges — we will say which decors suit which use.

Applications

Kitchen and bathroom cabinets

Doors, carcasses and plinths in matching decor.

Wardrobes and storage

Interior fit-out where a durable wipe-clean surface is needed.

Office furniture

Desks, credenzas and partition systems.

Retail display

Shelving and counters in branded colours.

Contract furniture

Where a repeatable, reorderable finish is essential.

Packing & container loading

ContainerVolumeDetails
20GP≈ 20 m³Palletised, faces protected with film
40HQ≈ 28 m³20–24 pallets, steel strapped
Edge bandingShipped in the same container, labelled by decor code

All shipments are palletised, steel strapped and wrapped in waterproof film. Loading photographs and a full document set are sent for every container.

Frequently asked questions

Can I get a sample of a specific melamine decor?
Yes. We send A4 samples of up to five decors free of charge by courier with freight collect, and full-size samples can travel with your trial order. Send the decor codes or photographs of the finish you need.
What is the difference between melamine faced MDF and particle board?
The face is identical; the substrate differs. MDF machines and routes cleanly and holds screws better, so it suits doors and visible edges. Particle board is cheaper and lighter and is normally used for carcasses and horizontal panels where the edge is banded.
Is melamine board waterproof?
The melamine face resists water well, but the core does not. Water entering an unsealed edge will swell MDF or particle board. Seal all cut edges with edge banding or silicone in kitchen and bathroom applications.
Do you supply matching edge banding?
Yes — PVC edge banding in 0.5, 1 and 2 mm, produced from the same decor batch as the board so the colour matches. It ships in the same container as the panels.

Need a price for Melamine Faced Board?

Tell us the specification and destination port. Formal offer within 24 hours, samples available on request.